7.9.6 Enable Device LogsYou are the IT security administrator for a small corporate network. You need to enable logging on the switch in the networking closet.In this lab, your task is to perform the following:• Enable Logging and the Syslog Aggregator• Configure RAM Memory Logging as follows:o Emergency, Alert, and Critical: Enableo Error, Warning, Notice, Informational, and Debug: Disable• Configure Flash Memory Logging as follows:o Emergency and Alert: Enableo Critical, Error, Warning, Notice, Informational, and Debug: DisableTask SummaryEnable logging and the Syslog aggregatorSet RAM memory logging to CriticalSet Flash memory logging to AlertsExplanationIn this lab, you perform the following:• Enable Logging and the Syslog aggregator• Configure RAM memory logging as follows:o Emergency, Alert, and Critical: Enableo Error, Warning, Notice, Informational, and Debug: Disable• Configure Flash memory logging as follows:o Emergency and Alert: Enableo Critical, Error, Warning, Notice, Informational, and Debug: DisableComplete this lab as follows:1. From the left menu, expand the Administration.2. Expand System Log.3. Select Log Settings.4. Under Logging, select Enable.5. Under Syslog Aggregator, select Enable.6. Under RAM Memory Logging, enable and disable the appropriate settings.7. Under Flash Memory Logging, enable and disable the appropriate settings.8. Click Apply.